How to prolong the service life of the shock absorber of car?

Shock absorber is installed on the vehicle is in order to make the frame and thevibration of the vehicle body decays rapidly, improve ride comfort and comfort, is widely used on a car is double acting telescopic shock absorber. The shock absorber is wearing parts, and the shock absorber work is good or bad, will directly affect the car stationarity and other parts of life, so we should try to ensure that the shock absorber is always in good working condition.

1, let the car 10km in poor condition of roads on the road after the stop, and thentouch the damper housing, if not hot enough, then no resistance the shock absorber, shock absorber without work. When the adding amount of the lubricating oil, and then test. If the shell fever, the shock absorber internal lack of oil, shouldadd enough oil. Otherwise the shock absorber invalidation.

2, press the bumper, then release, if the car has 2~3 jumps, the shock absorberwork well.

3, the car slowly driving and emergency braking, if the automobile shock is more intense, the shock absorber has a problem.

4, remove the vibration damper to erect, and the lower end of the connecting ring isclamped in a vise, pull pressure damping rod several times, then there should bestable resistance, and pull up resistance should be greater than the downwardpressure resistance. If the resistance is not stable or even no resistance, may be ashock absorber internal lack of oil or valve parts damaged, to be repaired orreplaced parts.

In use, the shock absorber should be how to do.

Shock absorber 1, use the regular factory production, ensure the driving safety and economy.

2, please you smooth driving, in order to reduce the impact of non normal shock absorber.

A. in a bad road, slow down;

B. minimize sudden acceleration, braking, sharp turns;

C. try not to overload driving.

3, often check the shock absorber parts is normal, such as dust cover, cushionblock, isolation block, if found damaged or aging, should be replaced promptly. And try to use the regular factory production of parts.

4, often check the tire pressure is normal, keep within prescribed limits.

5, always clean your car, especially pay attention to clean the shock absorberparts.

6, the damper must be replaced in pairs, so must use the products in the samefactory

Send your message to us:

  • * CAPTCHA: Please select the House

Post time: May-09-2017
  • * CAPTCHA: Please select the Car